Attaching The Wall-Mounting Fixtures - Panasonic UB-5310 Operating Instructions Manual

■ Attaching the wall-mounting fixtures

The electronic board must be mounted with the method most suited to the material of the wall.
Three methods are presented here.
(Other options may be available in your area.)
●
Attaching to metal or concrete walls
Stud plugs (sold in stores) are needed.
●
Attaching to plasterboard walls
Split-wing toggles (sold in stores) are needed.
Split-wing toggle
Plasterboard
Arms
Arms
Drill bit
Metal or concrete
wall
Stud plug
Insert a stud plug in each hole.
Wall-mounting
fixture
Bolt
Wall-mounting
fixture
Bolt
Wall-mounting
Drill four holes in the wall.
For the correct hole size, refer
to the instructions for the
particular stud plugs used.
Insert each bolt through a hole
in the wall-mounting fixture and
tighten until the wall-mounting
fixture is securely fixed to the
wall.
Insert each bolt through a hole
in the wall-mounting fixture and
into the hole in the wall beneath
so that the arms of the split-
wing toggle are horizontal. For
the correct hole size, refer to the
instructions for the particular
split-wing toggles used.
After the arms expand, pull the
wall-mounting fixture out until
the arms of the split-wing toggle
grip firmly into the wall.
Tighten each bolt until the wall-
mounting fixture is securely
fixed to the wall.
45