Figure 268 Vpn > L2Tp Vpn Example - ZyXEL Communications ZyWALL 1050 User Manual

Internet security appliance

Hide thumbs Also See for ZyWALL 1050:

Table of Contents

Chapter 27 L2TP VPN Example

Figure 268 VPN > L2TP VPN Example

2 Configure the following.

• Enable the connection.

• Set it to use the Default_L2TP_VPN_Connection VPN connection.

• Configure an IP address pool for the range of 192.168.10.10 to 192.168.10.20. It is

called L2TP_POOL here.

• This example uses the default authentication method (the ZyWALL's local user data

• Select a user or group of users that can use the tunnel. Here a user account named

L2TP-test has been created.

• The other fields are left to the defaults in this example, click Apply.

ZyWALL 1050 User's Guide

Troubleshooting