Chapter 16 Virtual Servers
16.3 NAT 1:1 and NAT Loopback Examples
The following sections provide examples of manually configuring NAT 1:1 mapping and a
policy route rule for NAT loopback. These are provided for your reference, you can select
options in the Virtual Server Add/Edit screen to have the ZyWALL automatically configure
these for you instead of configuring them manually.
NAT 1:1 Example
In this example, there is an SMTP mail server in the LAN zone. It has a private IP address of
192.168.1.21. The public IP address for the server is 1.1.1.1 and is on the ge3 interface.
In order for the server to be accessible to people from the Internet (WAN zone), you need to
create a 1:1 NAT mapping from the public IP address to the server's private one.
The firewall is enabled, so you also need to create a rule to allow traffic in from the WAN
zone.
Figure 173 NAT 1:1 Example Network Topology
192.168.1.21
276
LAN
ge2: 1.1.1.1
ZyWALL 1050 User's Guide