Toyota 2005 Sienna Owner's Manual page 27

—Opening and closing back
door (type B and C)
Type B
Type C
05 SIENNA_U (L/O 0409)
Push and hold the back door open
switch on the wireless remote control
transmitter for about one second. The
power back door opens and closes
completely.
When closing or opening the back door,
two beeps will be heard and the turn sig-
nal lights will flash twice.
Opening operation can be performed by
the switch under the following conditions
only:
The back door is unlocked.
D
The power back door system is on.
D
(The "BACK DOOR OFF" switch on the
instrument panel is pushed out.)
The key is not in the ignition switch.
D
The back door is between the fully−
D
closed position and half−opened posi-
tion.
Closing operation can be performed by the
switch under the following conditions only:
The power back door system is on.
D
(The "BACK DOOR OFF" switch on the
instrument panel is pushed out.)
The key is not in the ignition switch.
D
The back door is between the fully−
D
opened position and half−opened posi-
tion.
The back door operation by the wireless
remote control can be changed or dis-
abled. For details, contact your Toyota
dealer.
2005 SIENNA from Sep. '04 Prod. (OM45431U)
19