Body work
RS 50
REMOVING THE CLUTCH CONTROL
1
6
3
Read carefully (PRECAUTIONS AND GENERAL
INFORMATION).
Position the motorcycle on the stand.
Switch the ignition key to the " " position.
Slide back the boot (1).
Loosen the nut (2) by twisting it until it butts up against
the adjustor (3).
7
5
2
Line up the slots on the nut (2) and adjuster (3) with
the slot (4) on the clutch lever bolt (5).
Pull the clutch cable (6) out and withdraw it from its
4
housing on the clutch lever (7).
Loosen and remove the screw (8).
9
Torque setting for screw (8):
12 Nm (1.2 kgm) [8.8 Ft-lb].
Remove the clutch control (9).
8
7-10
ch. 7
Release 00
2001-03