General Safety Instructions - WAGNER W 3500 Instruction Manual

GB
Congratulations on purchasing your WAGNER 3500.
You have purchased a proprietary device that requires careful cleaning and care to ensure
trouble-free functioning. Read the operating instructions carefully before using the
tool and observe the safety instructions. Keep the operating instructions in a safe
place.

General safety instructions

Attention!
Read all the instructions. Non-observance of the instructions below can cause
electric shock, fire and or serious personal injuries. The term "power tool" used
below covers both mains-operated power tools (with mains lead) and
accumulator-operated power tools (without mains lead).
1. Workplace
a) Keep your workplace clean and tidy.
to accidents.
b) Never use the tool in hazardous areas that contain flammable liquids, gases
or dusts. Power tools generate sparks that can ignite the dust or vapors.
c) Keep children and other persons away when using the power tool.
lose control of the tool if you are distracted.
2. Electrical safety
a) The tool plug must fit into the socket. The plug may not be modified inany
form. Do not use adaptor plugs together with protective-earthed tools.
Unmodified plugs and suitable sockets reduce the risk of an electric shock.
b) Avoid physical contact with earthed surfaces such as pipes, heating
elements, stoves and refrigerators. The risk through electric shock increases if
your body is earthed.
c) Keep the equipment away from rain and moisture.
increases if water penetrates electrical equipment.
d) Do not misuse the mains lead by carrying the tool by the lead, hanging it
from the lead or by pulling on the lead to remove the plug. Keep the lead
away from heat, oil, sharp edges or moving tool parts. Damaged or twisted
leads increase the risk of an electric shock.
e) If you work outdoors, use only extension leads that are approved for
outdoor use. The use of an extension lead that is suitable for outdoors reduces the
risk of an electric shock.
3. Personal safety
a) Be attentive. Pay attention to what you are doing and work sensibly with
apower tool. Do not use the tool if you are tired or under the influence of
8
Operating Manual
Untidiness and unlit working areas can lead
W 3500 Kit
You can
The risk of an electric shock