Eliminating Faults; Environmental Protection - WAGNER W 3500 Instruction Manual

W 3500 Kit

Eliminating faults

Malfunction
Device is non-operational
No coating substance
emerges from the roll
Paint escapes from the
device
Device operates when on/
off switch is not pressed.

Environmental protection

The appliance and accessories should be recycled in an environmentally
friendly way. Do not dispose of the appliance with household waste. Support
environmental protection by taking the appliance to a local collection point or
obtain information from a specialist retailer.
Important information on product liability!
Due to an EC ordinance in effect since 01.01.1990, the manufacturer is liable for his product
only if all parts originate from or were approved by the manufacturer and the devices
are assembled and operated correctly. The use of other accessories and spare parts can
partially or completely invalidate the liability.
Cause
1. The power plug is not inserted.
2. The function switch is not set to
"Paint" and the on/off switch is not
pressed.
3. The material hose is kinked.
1. The end of the suction line is not
immersed in the paint.
2. The suction line is obstructed or
kinked.
3. No paint in the paint roll
4. O-rings in the quick-clean adapter
are dirty or worn.
1. Device not correctly cleaned.
2. Seal on roller frame is the wrong
way round
3. Components damaged or worn.
4. The hoses are damaged.
1.Function switch is set to "Clean".
Remedy
1. Insert the power plug.
2. Set the switch to "Paint" and
keep the on/off switch pressed.
3. Remove the kink.
1. Immerse the suction line
completely in the paint.
2. Free the line.
3. Press the on/off switch.
4. Clean O-rings or replace
closure of quick-clean adapter.
1. Clean the parts described in
Fig. 9 and 10.
2. Fit the seal the right way
round
3. Replace the relevant parts.
4. Contact Customer Service.
1. Set the function switch to
"OFF" or "Paint".
GB
13