Kyocera FS-4100DN Operation Manual page 75

1 Firmware Version
This item shows the version and release date of the printer
firmware.
2 Printer Settings Information
This item shows various printer settings for hardware-related
items:
- MP tray paper size and type
- Paper cassette size and type
- Copies
- EcoPrint
- KIR mode
- Resolution
- MP tray priority
- Sleep level
- Sleep time
- Power off time
- Form feed timeout time
- MP tray empty
3 Installed Options
This item shows the options installed in the printer:
- Paper Feeder
- Bulk Feeder
- SD/SDHC memory card
- SSD
- Card Authentication Kit (B)
- Data Security Kit (E)
- UG-33
4 Network Status
This item shows the IP address, subnet mask address, and
default gateway address for the network interface card in the
printer.
Note Only displayed on network compatible models.
5 Interface Information
This information shows the block status for items including the
USB memory slot and USB interface. When connected by
network interface card (NIC), block status is shown for an
optional interface.
6 Memory
This item shows:
- Standard memory in the printer
- Option memory slot status in megabytes
- Total memory in the printer
- Current status of the RAM disk
7 Emulation
This item shows all available emulations of the printer. The
KPDL (AUTO) or PCL 6 emulation is set as the default when the
printer is shipped from the factory. The emulations are:
- PCL 6
4-13
Operation Panel