Kyocera FS-4100DN Operation Manual page 105

Emulation (Setting the emulation)
You can change the emulation mode. Use the procedure below to select the mode.
Note To print the PDF file using FTP printing, set emulation to KPDL.
Emulation:
********************- 1 Emulation Set.
2 KPDL Error Rpt.
3
Alt. Emulation
Emulation Set.:
4 Line Printer
5
KPDL
6 *KPDL(Auto) ********************-
KPDL Error Rpt. (Printing KPDL errors)
The printer can print error descriptions when printing error occurs during KPDL emulation. The default setting differs
depending on the countries or regions.
IMPORTANT This setting only appears when KPDL or KPDL(Auto) is selected for the emulation.
Emulation:
1
********************- Emulation Set.
2
KPDL Error Rpt.
3
Alt. Emulation
1
2
a b
[ Exit ]
3
4
a b
5
6
1
2
a b
[ Exit ]
3
In the Print Settings menu, press
Press [OK]. The Emulation menu screen appears.
Press or to select Emulation Set..
Press [OK]. The Emulation Set. screen appears showing a list of
the available emulations. The defaults differ depending on the
delivery destination.
The available emulations are as follows:
PCL6
IBM Proprinter
EPSON LQ-850
Line Printer
KPDL
KPDL(Auto)
Press or to select the desired emulation.
Press [OK]. The emulation is set and the Emulation menu
reappears.
In the Print Settings menu, press
Press [OK]. The Emulation menu screen appears.
Press or to select KPDL Error Rpt..
4-43
Operation Panel
or to select Emulation.
or to select Emulation.