Kyocera FS-4100DN Operation Manual page 43

Lock Operation Panel
Restricts the operation from the Operation Panel. In order to operate locked menus, it is necessary to be logged in as a user
with Administrator authority.
The setting of Lock Operation Panel is done from Command Center RX. For the method for the setting, refer to the
Command Center RX User Guide.
The operations restricted by Lock Operation Panel are as follows.
Operation
System Menu
Report Print
USB Memory
Counter
Paper Settings
Print Settings
Network
1
Optional Network*
Device Common
1
Security*
1
User/Job Account*
Adjust/Maint.
1
Op Functions*
Document Box
Custom Box
Job Box
Operation Panel key operation
: It is necessary to log in as a user with Administrator authority to operate this.
— : No restrictions.
*1: Regardless of the Lock Operation Panel setting, it is necessary to be logged in as a user with Administrator authority.
*2: The addition and editing of Custom Box are restricted.
*3: Job Box Setting is restricted.
*4: Only [Logout] and operation for canceling printing are effective.
*5: Only [Logout] and [Cancel] for stopping the buzzer are effective.
Note Optional Network is only displayed when a network interface kit (IB-50) or wireless network interface kit (IB-
51) is installed as an option.
Lock Operation Panel settings
Partial
Unlock
Lock1
— —
— —
— —
— —
— —
—
—
—
2
— *
— —
— —
2-19
Preparation before Use
Partial Partial
Lock2 Lock3
—
—
—
—
2
*
3
*
4
— *
Lock
5
*