Yamaha 2004 YXR660 Service Manual page 281

REAR CONSTANT VELOCITY JOINTS, FINAL DRIVE
GEAR AND DRIVE SHAFT
2. Install:
• ring gear bearing housing
• M8 bolts (ring gear bearing housing) 1
• M10 bolts (ring gear bearing housing) 2
NOTE:
Apply Quick Gasket
threads.
3. Install:
• bearing retainer
M MMM M MMM M
a. Place a folded rag 1.
b. Secure the final drive pinion gear bearing
housing edge in the vise.
NOTE:
Apply locking agent (LOCTITE
of bearing retainer.
c. Attach the bearing retainer wrench 2.
Bearing retainer wrench
P/N. YM-04128, 90890-04128
d. Tighten the bearing retainer.
Bearing retainer
170 Nm (17.0 m · kg, 125 ft · lb)
LOCTITE
CAUTION:
The bearing retainer has left-hand threads.
Turn the retainer counterclockwise to
tighten it.
L LLL L LLL L
7 - 34
DRIV
23 Nm (2.3 m · kg, 17 ft · lb)
40 Nm (4.0 m · kg, 29 ft · lb)
to the bolts 1 and 2
®
M MMM M M MMM M M MMM M M MMM M
®
) to the threads
®
L LLL L L LLL L L LLL L L LLL L
MMM
LLL