Printing without a Power Outlet
To print where no power outlet is available, use Battery Pack NB-CP2LH
(sold separately). On a full charge, up to about 54 sheets* of postcard-size
paper can be printed.
* According to Canon testing. May vary depending on printing conditions.
Attaching the Battery Pack
1
Remove the battery pack
mounting cover.
z
z
With the switch held in the direction of the
arrow ( ), move the cover in the
direction of the arrow (
Air Vent
2
Remove the battery terminal
cover.
3
Attach the battery pack.
z
z
Slide the terminal-end in the direction of
the arrow ( ) and insert the other end
( ) until it clicks into place.
•
Battery Pack NB-CP2L (sold separately) can also be used. On a full charge,
up to about 36 sheets of postcard-size paper can be printed. According to
Canon testing. May vary depending on printing conditions.
Charging the Battery to Use SELPHY
•
Once power is connected
the screen.
•
When charging is finished in about four hours (at room temperature),
[
] will no longer be displayed.
•
SELPHY can be used even while [
(=
11). However, charging stops. When the power is turned off,
[
] blinks and charging resumes.
•
For battery precautions, refer to the battery user manual.
•
When [
temperature
) to remove.
temperature.
•
When [
Please purchase a new battery.
•
When [
button for 3 seconds or more to clear [
is off, press any button other than the <q> button to display [
approximately 10 seconds.
(=
11), charging starts and [
] is blinking by turning it on
] is displayed, place SELPHY in an environment at operating
(=
62), and charge once it has adjusted to the ambient
] is displayed in red, the battery has reached the end of its life.
] is displayed, press and hold any button other than the <q>
]. Also, if charging and the screen
Cover
] blinks on
Contents
Part Names
Basic Operations
Print Settings
Printing via Wi-Fi
] for
Printing via USB
Cable
Troubleshooting
Appendix
61