Adding the File Number when Printing (File
Number)
z
z
The file number can be added to the image when printing.
z
z
Off (default) /
Prominent /
•
Turning off SELPHY will restore the default setting of [
•
The file number added to prints is the file number assigned by the camera
when the photos were taken, so it cannot be changed by SELPHY.
•
File numbers are not printed when [Page Layout]
[
Shuffle].
•
File numbers are not printed when [ID Photo]
•
File numbers may not be printed depending on the aspect ratio of the image
or paper size.
•
When file number is set to [On] in DPOF Print
are applied even if the SELPHY settings are [Off].
•
[Subtle] printing may not be available even if [
depending on the aspect ratio of the image, printing orientation or paper size.
•
If [Subtle] printing is not available even when [
number is set to [On] in DPOF Print
[
Prominent].
Subtle
Off].
(=
26) is set to
(=
21) is selected.
(=
54), [Prominent] settings
Subtle] is selected
Subtle] is selected when file
(=
54), the image will be printed using
Using ID Photo Printing by Priority (ID Photo
Priority)
z
z
You can set the ID Photo Settings screen
SELPHY is turned on, when a memory card is inserted, and after printing.
z
z
When set to [Off], the [Select & Print] screen
z
z
Off (default) / On
z
z
In the screen in step 2 of "Configuring
Settings"
buttons to select [ID Photo Priority], and
then press the <o> button.
z
z
On the screen at left, press the <u><d>
buttons to adjust the settings, and then
press the <o> button to confirm your
choice.
Cover
(=
21) to display when
Contents
(=
14) is displayed.
Part Names
(=
25), press the <u><d>
Basic Operations
Print Settings
Printing via Wi-Fi
Printing via USB
Cable
Troubleshooting
Appendix
31