Canon selphy cp1200 User Manual page 40

• Confirm that the access point supports WPS (Wi-Fi Protected Setup).
WPS-Compatible Access Connect as described in "WPS-Compatible Access
Points Points" (=
Check the following information and connect as
described in "Non-WPS Access Points"
Non-WPS Access Points - Network name (SSID/ESSID)
Or WPS Support Unknown
- Network authentication / data encryption (encryption
method or mode)
- Password (network key)
* WPS connections are not possible for access points set up for WEP security. Connect
as described in "Non-WPS Access Points"
• If your network is managed by a system administrator, ask the
administrator for network setting details.
40)*.
(= 42) .
(= 42).
Connecting the Printer to the Access Point
How to connect varies depending on whether the access point is WPS-
compatible (= 40) or not (= 42).
WPS-Compatible Access Points
1
Check the access point.
z z Confirm that the access point is on and
ready for communication.
2
Prepare SELPHY.
z z Remove any inserted memory cards or
USB flash drives.
z z Insert a loaded paper cassette and an ink
cassette in SELPHY
3
Access the setting screen.
z z Press the <k> button.
z z Press the <u><d> buttons to select
[Wi-Fi Settings], and then press the
<o> button.
z z Press the <u><d> buttons to select
[Connection Settings], and then press the
<o> button.
Cover
Contents
Part Names
Basic Operations
Print Settings
(= 8 – 10).
Printing via Wi-Fi
Printing via USB
Cable
Troubleshooting
Appendix
40