Canon selphy cp1200 User Manual page 39

• Printing in progress cannot be canceled from SELPHY by using the <v>
button. Use the camera to stop printing.
• You can also connect the printer to a camera via an existing access point. In
this case, connect the printer and camera to the same access point. For details
on how to connect the printer to an access point, see "Connecting the Printer
to the Access Point" (= 40).
•
The printer does not enable communication between the devices connected
to it.
Subsequent Printing
•
Once you have completed the connection settings
second, standby screen in step 6 is displayed automatically when you
turn on the printer. To print, after the standby screen is displayed, simply
use the camera as described in steps 5 – 6.
•
During standby-screen display, you can view the SSID and password by
pressing the <o> button.
• Even during standby, you can print images on a memory card by
inserting the card to access the screen in step 4 on
Confirming Access Point Compatibility
•
Before you can print via Wi-Fi from a computer, the computer with the
images to send must be connected to an access point.
• Use an access point that supports the following Wi-Fi standards. To
check the standards your access point supports, refer to the access point
user manual.
Standards
(= 37 – 38), the
Supported
Channels
Transmission
Methods
Security
=
14.
Printing from a Computer
IEEE 802.11b/g
1 – 11
DSSS (IEEE 802.11b) and OFDM (IEEE 802.11g)
No security, 64- and 128-bit WEP (open system authentication),
WPA-PSK (TKIP), WPA-PSK (AES), WPA2-PSK (TKIP), and
WPA2-PSK (AES)
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via Wi-Fi
Printing via USB
Cable
Troubleshooting
Appendix
39