Cropping Images
Print only selected areas of an image as follows.
1
Access the cropping screen.
z
z
Choose an image as described in step
4 of "Printing Images (Select & Print)"
(=
then press the <o> button.
z
z
A crop frame is displayed, showing the
image area that will be cropped.
2
Adjust the image area to crop.
z
z
To switch the crop frame between portrait
and landscape orientation, press the
EDIT button.
z
z
To move the crop frame, press the
<u><d><l><r> buttons.
z
z
To enlarge the crop frame, press the
<-> button, and to reduce it, press the
<0> button.
14), press the EDIT button, and
3
Confirm the setting.
z
z
To confirm the cropping area and return
to the image display screen, press the
<o> button.
z
z
To crop other images for printing with the
first one, repeat steps 1 – 3.
4
Print.
z
z
Print as described in step 6 of "Printing
Images (Select & Print)"
z
z
After printing, crop settings are cleared.
•
To adjust the cropping area once you have set it, press the EDIT button on the
image display screen, press the <u><d> buttons to select [Adjust Cropping],
and then press the <o> button. Repeat steps 2 – 3.
•
To cancel cropping after you have set the cropping area, press the EDIT button
on the image display screen, press the <u><d> buttons to select [Reset
Cropping], press the <o> button to access the reset cropping screen, and
then press the <o> button again.
•
Cropping areas you have set are cleared if you turn off SELPHY or remove the
memory card before printing.
•
You can specify cropping for up to 99 images at once.
•
Cropping is not available when printing with [Print All Images], [Reprint]
or [DPOF Print] or when [Page Layout]
[
Shuffle].
•
The cropping aspect ratio indicated by the frame displayed on images cannot
be adjusted.
•
To change the number of copies, press the <u><d> buttons on the image
display screen in step 3. Note that specifying zero copies will not clear
cropping settings.
(=
14).
(=
26) is set to [
Index] or
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via Wi-Fi
Printing via USB
Cable
Troubleshooting
Appendix
20