Changing The Printer Name - Canon selphy cp1200 User Manual

Disabling Wi-Fi
Disable Wi-Fi connections as follows.
z z Press the <k> button and then the <u><d> buttons to select [Wi-Fi
Settings], and then press the <o> button.
z z
Press the <u><d> buttons to select [Wi-Fi], and then press the
<o> button.
z z Press the <u><d> buttons to select [Disable], and then press the
<o> button.
z z To re-enable Wi-Fi connections, repeat these steps and select [Enable].
Checking Wi-Fi Settings Information
Check information (including the printer name and IP address) as follows.
z z Press the <k> button and then the <u><d> buttons to select [Wi-Fi
Settings], and then press the <o> button.
z z
Press the <u><d> buttons to select [Confirm Settings], and then
press the <o> button.
z z Press the <u><d> buttons to check setting information.
z z Press the <v> button to exit.

Changing the Printer Name

Change the printer name (= 43) as follows.
z z Press the <k> button and then the <u><d> buttons to select [Wi-Fi
Settings], and then press the <o> button.
z z Press the <u><d> buttons to select [Other Settings], and then press
the <o> button.
z z Press the <u><d> buttons to select [Set Printer Name], and then
press the <o> button.
z z Press the EDIT button to access the input screen, and then enter a new
printer name (= 49).
Specifying the Communication Protocol
Select the IP version.
1
Select the IP version.
z z Press the <k> button and then the <u><d> buttons to select [Wi-Fi
Settings], and then press the <o> button.
z z Press the <u><d> buttons to select [Other Settings], and then press
the <o> button.
z z Press the <u><d> buttons to select [IPv4/IPv6 Settings], and then
press the <o> button.
z z Press the <u><d> buttons to select the version, and then press the
<o> button.
z z Check the indicated information and press the <o> button.
z z When selecting [IPv4], go to step 2.
z z
When [IPv6] is selected, select [Enable] or [Disable] and press the
<o> button.
2
Choose auto or manual IP address configuration.
z z For automatic IP address configuration, choose [Auto] and press the
<o> button. Setup is now finished.
z z To enter the IP address manually, choose [Manual] and press the
<o> button. Go to step 3.
3
Enter the IP address.
z z Press the <l><r> buttons to move the cursor, press the <u><d>
buttons to specify the value, and then press the <o> button.
4
Enter the subnet mask.
z z
Press the <l><r> buttons to move the cursor, press the <u><d>
buttons to specify the value, and then press the <o> button.
5
Check the settings.
z z Review the indicated setting details and press the <o> button.
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via Wi-Fi
Printing via USB
Cable
Troubleshooting
Appendix
48