Commissioning
Programming
Setting the weekly timer
9 – 86
Aquarea air/water heat pump – Installation manual for monobloc and split systems C, D and E series 05 / 2014
Changing or adding timer programs
Repeat the above-mentioned steps
➤
Deactivating the timer
Press the TIMER button, then the CANCEL button .
➤
Activating the timer
Press the TIMER button, then the SET button .
➤
Checking the timer program
Press the TIMER button .
➤
Press the UP or DOWN button until the required weekday is
➤
displayed .
Press the SELECT button to confirm the setting .
➤
Press the UP or DOWN buttons to check the programs set .
➤
Deleting timer programs
Press the TIMER button .
➤
Press the UP or DOWN button until the required weekday is
➤
displayed .
Press the SELECT button to access the program setting .
➤
Press the UP or DOWN button until the required weekday is
➤
displayed .
Press the CANCEL button to delete the program setting .
➤