Panasonic WH-MDF09C3E5 Installation Manual page 84

Hide thumbs Also See for WH-MDF09C3E5:
Table of Contents

Advertisement

Commissioning
Programming
Special functions | Reset to factory settings
DEFROST
SETTING
STATUS
SERVICE
7. Duration of heating period (30 min
to 10 hours, Standard: 3 hours) .
Setting the duration for heating mode
in the heating and water heating
operating mode .
DEFROST
SETTING
STATUS
SERVICE
8. Water heating duration (5 min to
1 hour 35 min, Standard: 30 min)
Setting the duration for water heating
in the heating and water heating
operating mode
9. Hot water immersion heating
function (YES / NO, Standard: NO)
Reset to factory settings
Note
All settings are preserved in the
event of a power failure (stored
in EPROM) . The weekday and
time are buffered by a battery
for roughly 36 hours, after
which they must be set again .
9 – 84
Aquarea air/water heat pump – Installation manual for monobloc and split systems C, D and E series 05 / 2014
10. Switch-on delay of the electric im-
mersion heater for hot water (20 min
to 1 hour 35 min , Standard: 1 hour)
Setting the delay period before the im-
mersion heating is switched on for the
hot-water tank if the tank temperature
is not reached
11. Sterilisation (YES / NO, Standard:
YES) Setting for sterilisation of the
hot water .
12. Day and time of sterilisation
(Standard: Monday 12:00 noon) Setting
day and time of the weekly sterilisation .
TIMER
OUTDOOR
HEAT
COOL
TANK
QUIET
HEATER
FORCE
OPERATION
WATER OUTLET
OFF/ON
SETTING
TIMER
SET
MODE
OFF/ON
SELECT
QUIET
ERROR
CANCEL
CLOCK
RESET
Press the three marked operating buttons simultaneously for
5 seconds to reset to the factory settings .
DEFROST
SETTING
STATUS
SERVICE
13. Sterilisation temperature
(40 to 75 ℃, Standard: 70 ℃)
Setting the temperature to be used
for sterilisation .
DEFROST
SETTING
STATUS
SERVICE
14. Sterilisation duration (5 min . to
1 hour, Standard: 10 min .) Setting
the period required to retain the tank
temperature required for sterilisation .
DEFROST
SETTING
STATUS
SERVICE
ACTUAL
HEATER
BOOSTER
DEFROST
SETTING
STATUS
SERVICE
STATUS
SETTING
SETTING
STATUS
CHECK
TIMER
SET
TIMER
MODE
CHECK
SET
MODE
SEARCH
SEARCH
HEATER
OFF/ON
SELECT
OFF/ON
QUIET
HEATER
SELECT
QUIET
ERROR
ERROR
CANCEL
CANCEL
FORCE
SERVICE
CLOCK
CLOCK
RESET
FORCE
PUMPDW
RESET
DEFROST
SETTING
STATUS
SERVICE
DEFROST
SETTING
STATUS
SERVICE
STATUS
CHECK
SEARCH
HEATER
FORCE
PUMPDW

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents