Panasonic WH-MDF09C3E5 Installation Manual page 65

1 Cable tape or cable duct
2 Clamp
3 Connection cable between hy-
dro module and outdoor unit
4 Liquid refrigerant pipe
5 Gaseous refrigerant pipe
6 Outdoor unit
Aquarea air/water heat pump – Installation manual for monobloc and split systems C, D and E series 05 / 2014
Split systems: Electrical connection between hydro module and outdoor unit
6
Wrap cable tape around the pipes and cables as shown in the figure
➤
and secure using clamps if necessary .
Alternatively, you can lay the pipelines and cables in a cable duct .
After laying all pipes and cables, seal the wall penetration into the
➤
building with suitable sealant (to be provided by the customer) .
1
2
3
4
5
Electrical installation
Connections
8 – 65
8