Table of Contents
Advertisement
Troubleshooting
Here are some simple solutions to problems which may affect the picture and sound.
Problem
No picture (screen is dark) and no
sound.
Poor or no picture (screen is dark), but
good sound.
No picture or no menu information
from equipment connected to the
Scart connector.
Good picture, no sound.
No colour on colour programmes.
When you switch on the TV the last
channel you were watching before
switching the TV off does not appear.
Distorted picture when changing
programmes or selecting teletext.
Brightness level of the text or the On
Screen Display symbols are
notoriously decreased.
32
Additional Information
Solution
• Check the aerial connection.
• Plug the TV in and press the
• If the standby indicator
the remote control.
• Using the menu system, select the "Picture Adjustment" menu and select
"Reset" to return to the factory settings (see page 13).
• Check that the optional equipment is on and press the
repeatedly on the remote control until the correct input symbol is
displayed on the screen (see page 25).
• Press the
+ button on the remote control.
• Check that "TV Speakers" is "On" in the "Sound Adjustment"
menu (see page 15).
• Check that headphones are not connected.
• Using the menu system, select the "Picture Adjustment" menu and select
"Reset" to return to factory settings (see page 13).
• This is not a malfunction. Press the number buttons on the remote control
to select the desired channel.
• Turn off any equipment connected to the Scart connector on the rear of the
TV.
• This is not a malfunction. After 5 minutes viewing the same teletext page
or with a symbol displayed on the screen and without any button being
pressed, the projection TV automatically decreases the brightness level of
the text and symbols displayed to avoid any damage to the picture tube. To
reset the brightness level, press any button of the remote control.
button on the front of the TV.
is on, press TV
button on
button
continued...
Advertisement
Table of Contents
