Sony KP-44PX2U Quick Start Manual

S
KP-44PX2U
®
Thank you for purchasing this Sony product.
After following this step by step guide you
will be able to:
Insert Batteries into the Remote Control.
Connect the Aerial and VCR to your
projection TV.
Select the language of the menu screens.
Tune your projection TV.
Change the broadcast channels into a
different order.
View TV Programmes.
100 Hz
Projection TV
©2002 by Sony Corporation
Ecological Paper - Totally Chlorine Free
Checking the
Accessories Supplied
Remote Control RM-938
Inserting Batteries into
the Remote Control
• Make sure you insert the supplied batteries using the
correct polarities.
• Always remember to dispose of used batteries in an
environmental friendly way.
4-089-569-01 (1)
Printed in Spain
1
Connecting the Aerial
and VCR
2 Batteries (AA size)
2

Switching on the TV

Connecting cables are not supplied.
or
VCR
OUT IN
The Scart lead is optional.
If you use this optional connection
it can improve the picture and sound quality when using a VCR.
If you do not use a SCART lead, after automatically tuning the projection TV
refer to the Manual Programme Preset option on page 16 step a) of the
instruction manual, to tune in the TV to the output of your VCR. Also refer
to your VCR instruction manual to find out how to find the output channel
of your VCR.
Connect the TV plug
to the mains socket
(220-240V AC, 50Hz).
The first time the TV set is
connected, it is usually turned on. If
the TV is off, push in the
switch on the front of the set.
3
4
On/Off