Table of Contents
Advertisement
USB/audio board
Description
USB/audio board
USB/audio board cable (included in Cable Kit)
Before removing the USB/audio board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Optical drive
b.
Service doors (see
c.
Optical drive
d.
Hard drive
e.
Keyboard (see
f.
Top cover (see
Remove the USB/audio board:
1.
Position the top cover upside-down.
2.
Remove the Phillips PM2.5×3.0 screw (1) that secures the board to the computer.
56
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page
(Optical drive on page
35)
Service doors on page
(Optical drive on page
35)
(Hard drive on page
37)
Keyboard on page
43)
Top cover on page
48)
32).
33).
Spare part number
827032-001
828418-001
Advertisement
Table of Contents
