Installing Your Phone; Set Up The Base - Uniden XDECT SSE27 series Owner's Manual

Set Up the Base

Attach the stand
Before you attach the stand, you have to decide if you want the phone to
rest on a desk or hang on a wall.
For desktop use
1) Turn the stand so
the word
DESk
right side up (it will
be on the left).
2) Insert the tabs into
the notches at the
top of the base.
3) Press in on the
latches and slip
them into the
notches marked
.
DESk
For wall mount use
1) Turn the stand so
the word
WAll
right side up (it will
be on the left).
2) Insert the tabs into
the notches at the
bottom of the base.
3) Press in on the
latches and slip
them into the
notches marked
.
WAll
To remove the stand
Press in on the latches and slide them out of the notches.

Installing Your Phone

is
is
D E S K
D E S K
W A L L
D E S K
W A L L
W A L L
1