Table of Contents
Advertisement
The Ans. Setup Menu
This menu controls the options and settings for your answering system (see
"Ans. Setup menu options" on page 25).
Day & Time Setting
You need to set the day and time so messages get the correct time stamp.
1)
Use
and
UP
2)
Use the number keypad to enter the hour and minutes.
3)
Use
and
UP
The Global Setup Menu
The settings on this menu apply to all the handsets and the base. Before
changing these settings, make sure the phone is in standby and all
handsets are within range of the base. (Only one station at a time can
change these settings.)
Set Line
Do not change this setting unless instructed to by customer
Mode
service.
This feature adds "0" or "00" at the beginning of the number
Insert 0
received from Caller ID. The default setting for New Zealand is
ON. The default setting for Australia is OFF.
VMWI
(Base only) Reset the voice message waiting indicator to bring it
Reset
back into sync with your voice mail service (see page 23 ).
Register Handset (Base Only)
This menu lets you register additional handsets to this base or re-register
a handset that you had to reset for some reason (see "Resetting and
Registering Handsets" on page 31). If you want to use other accessory
handsets, visit our website listed on the front cover.
to choose the day of the week; press
DOWN
to select AM or PM; press
DOWN
SElECT/MENU
.
SElECT/MENU
.
13
Hide quick links:
Advertisement
Table of Contents
