Using Multi-Station Features; Expanding Your Phone; Using Conference Calling; Using Privacy Mode - Uniden XDECT SSE27 series Owner's Manual

Using Multi-station Features

The expandable base works together with the accessory handsets to give
you some useful multi-station features. (A station can be any cordless
handset or the base.) You must have at least one accessory handset to
use the features in this section.

Expanding Your Phone

Your base supports a total of six SSE05 accessory handsets, including

any that were supplied with your phone.
Your phone may be compatible with other Uniden accessory handsets.

Please visit our website for a list of compatible handsets for your base.
Accessory handsets must be registered to the base before you can

use them. Handsets that have not been registered display a Handset
not registered message. See page 31 for instructions on registering
handsets to this base, or see the manual for the accessory handset.
Any accessory handsets that came packaged with the base are already

registered to that base for you.
If a handset was previously registered to a base, you have to reset it so

you can register it to a new base (see page 31 for SSE05 handsets).

Using Conference Calling

When an outside call comes in, the base
and two cordless handsets can join in a
conference call with the outside caller. To
join the call, just pick up the corded
handset from the base or press
cordless handset. To leave the
conference call, hang up normally; the
other station remains connected to the
call. (You can also use the speakerphone
for a conference call, just like you can with a normal call.)

Using Privacy Mode

You can prevent other stations from joining a call. Start your call as usual,
then press
SElECT/MENU
again to turn privacy mode on (you'll see a
MENU
you hang up this call, privacy mode turns off automatically.
As long you have privacy mode on, no other stations can interrupt your
call. If you want to let another station join the call, turn privacy mode off.
To turn it off, just repeat the process above (press
20
on a
TAlk
: the display shows Call Privacy. Press
Outside call
Handset #2
Base
Handset #1
speakerphone
or corded handset
in the display). When
SElECT/MENU
SElECT/
twice).