Using Call Waiting - Uniden XDECT SSE27 series Owner's Manual

Dialing from the Caller ID list
1) Find the entry you want to dial.
2) On the handset, press
the corded handset.
(You can also press
before opening the CID list. Find the number you want to dial, then press
.)
SElECT/MENU
Caller ID menu options
With the phone in standby, open the CID list and find the number you
want. Press
SElECT/MENU
options:
Delete Entry
Store Into Pb
Delete All

Using Call Waiting

If you get a Call Waiting call, the phone sounds a tone and displays any
CID information received for the waiting call.
For Australia:
Press
FlASH/EXIT
to accept the waiting call. The first caller is put on hold, and you will hear
the new caller after a short pause. To return to the original caller, press
(
FlASH/EXIT FlASH
For New Zealand:
Press
FlASH/EXIT
waiting call. The first caller is put on hold, and you will hear the new caller
after a short pause. To return to the original caller, press
on the base) again.
TAlk
on the handset or pick up the corded handset
TALK
to open the Caller ID menu; choose one of these
Erase this Caller ID number.
Add this number to this station's phonebook. The station will
prompt you to enter the name and edit the phone number.;
cordless handsets also prompt you to choose a personal ring.
Erase this station's CID list. (This does not affect the CID lists
saved on any other stations.)
on the handset (or
on the base) and then
on the handset (or
to dial the number. On the base, pick up
on the base) and then press
FlASH
again.
2
on the base) to accept the
FlASH
2
(
FlASH/EXIT FlASH
17