Trane TZEMT500AB32MAA Installation Instructions Manual page 13

18A
Gas Furnace - Multistage Mechanical Settings
a. Press the MENU button twice.
b. Press and hold the two inner buttons for 3 seconds to view
Installer Settings.
c. Scroll down to System Settings and press the Select button.
d. Scroll to Mechanical Settings (it is the first option), then press the
Select button.
e. Scroll down to 2nd Stage Heat.
f. Press the + button to change the setting to Y for Yes.
g. If your system also has 2nd stage cooling, scroll down to 2nd
Stage Cool and Press the + button to change the setting to Y for
Yes.
h. Press the Done button 4 times and go to step 19.
18B
Electric Furnace Mechanical Settings
Press the MENU button twice.
a.
b. Press and hold the two inner buttons for 3 seconds to view
Installer Settings.
c. Scroll down to System Settings and press the Select button.
d. Scroll to Mechanical Settings (it is the first option), then press
the Select button.
e. Scroll down to Fan Type.
Press the + button to change the setting Electric.
f.
Î If Single Stage System, press Done 4 times and go to step Î
19.
Î
Î If Multistage System, continue with steps "g" through "j".
g. Scroll down to 2nd Stage Heat.
h. Press the + button to change the setting to Y for Yes.
i. If your system also has 2nd stage cooling, scroll down to 2nd
Stage Cool and Press the + button to change the setting to Y for
Yes.
j. Press the Done button 4 times and go to step 19.
18C
Heat Pump Mechanical Settings
a. Press the MENU button twice.
b. Press and hold the two inner buttons for 3 seconds to view
Installer Settings.
c. Scroll down to System Settings and press the Select button.
d. Scroll to Mechanical Settings (it is the first option), then press the
Select button.
e. Scroll to system Type.
f. Press the + button to change the setting to Heat Pump.
g. Scroll down to Fan Type.
h. Press the + button to change the setting Electric.
i. If Coleman, Rheem, or Rudd brand heat pump, scroll to C/O Type
and change to With Heat.
Î
Î If Single Stage System, press Done 4 times and go to step
19.
Î If Multistage System, continue with steps "j" through "n". Î
j. Scroll down to 2nd Stage Heat.
k. Press the + button to change the setting to Y for Yes.
l. Scroll down to 2nd Stage Cool.
m. Press the + button to change the setting to Y for Yes.
n. Press the Done button 4 times and go to step 19.
11:15 AM
75 76 H
74 C
MENU MODE FAN
Menu
Two inner
button buttons
Mechanical Settings
Type Heatpump
Fan Type Elec
C/O Type w/Cool
2nd Stage Heat N
Done Select
+
Select button
button
RUN
Scroll
up
Scroll
down
13