Checking The Job Log - Canon Laser Class 810 Basic Operation Manual

Checking the Job Log

You can specify whether or not to check the job log. When you set <CHECKING THE
LOG> to <ON>, you can check the job log using the System Monitor screen. When
you set <CHECKING THE LOG> to <OFF>, the job log does not appear on the System
Monitor screen.
When you set <CHECKING THE LOG> to <OFF>, the Actvty Report wll not prnt automatcally.
1
Press [Additional Functions].
2
Press [ ] or [
If the System Manager ID and System Password have been set, enter the System Manager ID and System
Password usng the numerc keys, then press [Log In/Out (ID)].
3
Press [ ] or [
4
Press [ ] or [
5
Press [Stop] to return to the standby mode.
9-32
] to select <SYSTEM SETTINGS>, then press [OK].
] to select <CHECKING THE LOG>, then press [OK].
] to select <ON> or <OFF>, then press [OK].