Error Codes
An error code is a four-digit code shown on an ERROR TX REPORT or an ERROR RX
REPORT when an error occurs.
For detals on reports, see Reference Gude > Mantenance > Summary of Reports and Lsts.
See the table below for ndvdual error codes.
Error Code
#0001
A document may be jammed.
#0003
–
–
–
Description
An attempt was made to send a
document of 24 7/8" (630 mm) or
longer from the ADF.
A document takes a long tme to
send because t contans too much
data.
A document takes a long tme to
receve.
Action
Remove the jammed document.
–
Dvde the document nto smaller
parts and send from the platen
glass.
–
Reduce the scannng resoluton
before sendng.
–
Contact the other party and ask
them to reduce ther scannng
resoluton or dvde the document
nto smaller parts for sendng.
11-13