Dynamic Routing - AT&T Plug&Share 6800G User Manual

Advanced System Settings
Basic > Advanced > Admin > Status > Shortcuts > Help
Virtual Server
Multi-Mode Applications
Filters
Firewall
DMZ
Routing
Performance

Dynamic Routing

Select this option to control how the router automatically builds routing information. Consult your network
administrator before doing so.
NOTE: Consult your Internet Service Provider (ISP) or network administrator before changing these settings.
• NAT: (Default On) NAT stands for Network Address Translation (also known as IP masquerading)
which enables your local area network to identify itself to the Internet with one address. You should
leave this setting on unless directed to do otherwise by your network administrator.
• Transmit: (Default Off) If you enable dynamic routing, you should choose RIP2 (Routing Information
Protocol 2) unless directed to do otherwise by your network administrator.
• Receive: (Default Off) If you enable dynamic routing, you should choose RIP2 unless directed to do
otherwise by your network administrator.
AT&T Plug&Share 54 Mbps Wireless Router 6800G
™
31