Honeywell Dolphin 70e User Manual page 35

Closing ScanWedge NGW
Navigate to the Power Tools Main Window and tap the ScanWedge NGW icon again.
OR
Tap the ScanWedge NGW in the command bar
Modifying the ScanWedge NGW Configuration File
A ScaneWedgeNGW.exm file is inserted in the \Honeywell folder when ScanWedge NGW is installed, This file
specifies configuration parameters for ScanWedge NGW and must not be moved.
Either use EZConfig Editor on your workstation or terminal to modify the ScnaWedgeNGW.exm file. For more
information see EZConfig Editor on the Workstation (PC) or EZConfig Editor on the Dolphin Terminal in the Dolphin
Power Tools 8.x User's Guide for Mobile Devices with Windows Embedded Handheld available on
www.honeywellaidc.com.
ScanWedgeNGW.exm Sections
Section
Settings
Comm
Decode
Centering
Formatting
Symbology (XRS)
(for model 8620)
Symbology (LXE)
(for all other models)
VK Mapping
Blacklist
Select the section then click or double click any Key to view the key's full information or to edit the key values in the
ScanWedgeNGW.exm file.
Data Formatting Reference Charts
Data formatting is covered in the Dolphin Power Tools 8.x User's Guide for Mobile Devices with Windows Embed-
ded Handheld available on www.honeywellaidc.com.
(page 4-2) and select Exit in the command bar menu.
Description
Programs general settings for ScanWedge NGW.
Specifies how the serial (RS-232) port interfaces with ScanWedge NGW.
Specifies how the decoder/scanner interfaces with ScanWedge NGW.
Defines the centering window for scanning bar codes when ScanWedge NGW is
interfacing with the decoder.
Defines data formatting functionality.
Defines the symbologies that the scanner can decode and send to ScanWedge NGW.
Note: For 8620, the model number is located on the product label, see
Defines the symbologies that the scanner can decode and send to ScanWedge NGW.
Defines the virtual key sent to ScanWedge NGW for any decoded ASCII character.
Specifies applications where ScanWedge NGW is disabled.
page A-3
4 - 3