Adjusting Headset / Microphone And Securing Cable - Honeywell Dolphin 70e User Manual

4. Slide the cable ends together until they click. Do not twist or bend the connectors.

Adjusting Headset / Microphone and Securing Cable

The headset consists of an earpiece, a microphone, a clothing clip and a cable. The headset attaches to the audio cable
end of the voice cable which attaches to the audio end cap.
Do not twist the microphone boom when adjusting the microphone. The microphone should be adjusted to be about one or
two finger widths from your mouth.
Make sure the microphone is pointed at your mouth. Note the small "Talk" label near the mouthpiece. Make sure the Talk
label is in front of your mouth. The microphone cable can be routed over or under clothing.
Under Clothing
Leave the cable exposed only at the top of the collar. Be sure to leave a small loop of cable to allow movement of your
head.
Over Clothing
Use clothing clips to hold the cable close to your body. Tuck the cable under the belt, but leave a small loop where it goes
under the belt. Do not wear the cable on the front of your body. It may get in your way or get caught on protruding objects.
2 - 8