Removing The Outdoor Control P.c. Board - Mitsubishi Electric MXZ-2B20NA Service Manual

OPERATING PROCEDURE
2. Removing the outdoor control P.C. board, the reac-
tor and the outdoor power P.C. board
(1) Remove the service panel and the top panel (Photo 1).
(2) Disconnect the connectors on the outdoor control P.C.
board.
Remove the screws of the the outdoor control P.C. board,
and remove the outdoor control P.C. board.
(3) Remove the screws of the reactor cover, and remove the
reactor cover.
(4) Remove the screws of the reactor, and remove the reac-
tor.
(5) Remove the screws of the outdoor power P.C. board, and
remove the outdoor power P.C. board.
Photo 6
Screws of the reactor cover
Photo 7
Screws of the outdoor
power P.C. board
Screws of the reactor
OBH560G
Photo 3
Screws
of the
electrical
parts
Photo 4
Screws
of the
electrical
parts
Photo 5
Screws of the outdoor control P.C. board
89
PHOTOS