BMW G 650 Xmoto Rider's Manual page 89

Insert inside end of lens into
light housing and close.
Install screw 1.
Diode rear light
If more than three diodes of the
rear light have failed, it must be
replaced. In this case, consult a
specialized workshop, preferably
an authorized BMW Motorrad
retailer.
Replacing license-plate
bulb
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Make sure that the motorcycle is
steady on its stand.
Make sure ground is level and
firm and park motorcycle.
Pull bulb socket 1 out of bulb
holder.
Pull bulb 2 out of socket 3.
Replace defective bulb.
8
87
z