BMW G 650 Xmoto Rider's Manual page 47

wait for this procedure to be
completed to avoid problems
during driving.
Press starter button 1.
At extremely low tempera-
tures it may be necessary
to operate the throttle twist grip
during starting. At ambient tem-
peratures below 32 °F (0 °C),
actuate the clutch after switching
on the ignition.
If the engine fails to start
although the starter turns,
insufficient battery voltage may
be the reason. Recharge the bat-
tery before you start the engine,
or use jump leads and a donor
battery to start.
Engine starts.
Consult the troubleshooting
chart if the engine refuses to
start. ( 100)
Pre-ride check
After the ignition is switched on,
the instrument cluster conducts a
test of the warning and indicator
lights and the display, the so-
called "Pre-Ride-Check".
Phase 1
All warning and indicator lights
and all segments of the multi-
function display are switched on
for a short time.
Phase 2
The tire parameters stored in the
instrument cluster are displayed
for a short time.
Then the instrument cluster as-
sumes normal operation.
If one of the specified warn-
ing and indicator lights was not
switched on, or if not all seg-
ments of the multifunction dis-
play are switched on:
If it was not possible to
switch on the warning
lights, possible malfunctions
cannot be indicated.
Watch all warning and indicator
lights on the display.
Have the malfunction corrected
as soon as possible by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
ABS self-diagnosis
The readiness for operation
of the BMW Motorrad ABS is
checked by the self-diagnosis.
Self-diagnosis is performed
automatically when you switch on
the ignition. To check the wheel
5
45
z
OE