BMW G 650 Xmoto Rider's Manual page 76

8
74
Insert axle 5 as far as possible.
Threaded fasteners not
tightened to the specified
torque can work loose or their
z
threads can suffer damage.
Always have the tightening
torques checked by a specialized
workshop, preferably an
authorized BMW Motorrad
retailer.
Tighten axle clamping screw 4
with specified torque.
Front axle clamping
7 lb/ft (10 Nm)
Remove front wheel stand.
Install the axis screw 3 with
torque.
Nut on front quick-re-
lease axle
59 lb/ft (80 Nm)
Without actuating brake: firmly
compress spring forks several
times.
Tighten the left-hand axle
clamping screws 2 with
specified torque.
Front axle clamping
7 lb/ft (10 Nm)
With OE BMW Motorrad ABS:
Mount ABS sensor in hold-
er and install screw 1 of ABS
sensor.
Remove auxiliary stand.
Place brake caliper on brake
disk.