BMW G 650 Xmoto Rider's Manual page 81

ter stand or an auxiliary stand
before lifting it with the BMW
Motorrad front wheel stand.
Place motorcycle on an auxil-
iary stand; BMW Motorrad rec-
ommends the BMW Motorrad
auxiliary stand.
Mounting auxiliary stand
( 77)
Use front wheel stand with
number (363970).
Loosen adjustment screws 1 of
front wheel stand.
Push two mounts 2 far enough
apart that front forks fit be-
tween them.
Use locating pins 3 to set front
wheel stand to desired height.
Center front wheel stand rela-
tive to front wheel and push it
against front axle.
Align two mounts 2 so that
front forks rest securely on
them.
Tighten adjusting screws 1.
If the motorcycle is raised
too far at the front the aux-
iliary stand will lift clear of the
ground and the motorcycle could
topple to one side.
When raising the motorcycle,
make sure that the auxiliary stand
remains on the ground. Adjust
the height of the front-wheel or
auxiliary stand if necessary.
Apply uniform pressure to push
front wheel stand down and
raise motorcycle.
8
79
z