Replacing front and rear
8
turn indicator bulbs
If it is not standing firmly,
86
the motorcycle could topple
in the course of the operations
described below.
Make sure that the motorcycle is
steady on its stand.
Make sure ground is level and
firm and park motorcycle.
z
Remove screw 1.
Pull glass on screw connection
side out of mirror housing.
Remove bulb 2 from
light housing by turning it
counterclockwise.
Replace defective bulb.
Bulbs for flashing turn
indicators, front
RY10W / 12 V / 10 W
Bulbs for flashing turn
indicators, rear
RY10W / 12 V / 10 W
Install bulb 2 by turning clock-
wise in light housing.