Send Contact - Motorola DTR SERIES DTR550 User Manual

5-4
8. Scroll to the contact to receive the new contact.
9. Press
10. Press
these are correct press
are not correct press
11. The screen displays the message "Clone Sending XXXXXXX". X = the contact you are send-
ing to. If sending a contact to a PrivateGroup, the display shows each target radio individually.
If cloning was successful, both the source and targets radios indicated "Programming Successful". If
over-the-cloning to a PrivateGroup fails, the radio displays the failed clone list. The user can attempt
cloning again to any members of this list.
February 10, 2005
under Select to select the contact.

Send Contact

Add:Joe Smith
To:Security
Change
under Prgm. The screen is displayed showing the Add: and To: selections. If
under Go to transmit the selection over the air. If the selections
under Back to return to the selection menu.
Press Go To
Add:Joe Smith
To:Security
Over The Air
Go
Cloning Mode: Cloning by Sending a Contact
Prgm
Back
9980384R89-O