Entering Programming Mode; My Info - Motorola DTR SERIES DTR550 User Manual

4-2
Although factory programmed with default PublicGroups, DTR Series radios require user-specific
programming in order to fully benefit from their digital features.
This occurs in a separate programming mode which allows access to modify and add contacts,
update existing and add new quick notes, and access manager features (DTR650 only) such as
Remote Disable and Remote Monitoring. A mini keyboard (NNTN5491) is used to enter text into
contacts and to modify saved text messages.
The RRDN5378A Cloning Cable allows easier programming as one radio can be programmed with
all contact information then duplicated in other radios. All PrivateGroups MUST be programmed on a
single radio and cloned either over-the-air or with the cloning cable in order to maintain a single
GroupID. This is not a requirement of PublicGroups, but they must still be programmed on the same
channel to communicate.
New radios should be cloned using serial cloning. After this occurs, the unit ID can be sent to the
other radios or added to PrivateGroups via over-the-air or serial cloning.

Entering Programming Mode

The following key sequence must be performed to enter the programming mode.
1. Hold down
2. Press the Right
3. Press
4. Press the Left
5. Hold down
The Program Menu screen appears.

My Info

1. Highlight Contacts and press
2. Scroll to select it and press
3. Press
February 10, 2005
and press the PTT button three times.
.
.
.
and press the PTT button three times.
Program Menu
Contacts
Text Messages
Settings
Select
under View. Your unit name, ID, and channel are shown.
under Edit to change the unit name or channel.
Radio Programming: Entering Programming Mode
Reset
under Select. A appears to the right of the display.
9980384R89-O