Introduction: Attaching the Battery
Charging a Radio and Battery using a Multi-Unit Charger
A Multi-Unit Charger (MUC) is available separately (RPN4040) which will charge up to 6 radios,
batteries, or a combination of the two at the same time.
When charging a radio in the MUC, the battery icon on the radio display shows the charging status.
When charging a battery, the LED in front of the pocket indicates charging status. The LED is solid
red when the battery is charging, and solid green when charging is complete.
Battery Meter
The battery meter in the upper right corner of the radio display shows how much battery power is remaining:
Battery Type
Li-Ion
100%–85%
Attaching the Battery
1. If the battery door is already in place, push down on the latch at the top and lift the door off
the radio.
2. Insert the battery, printed arrows first, into the battery compartment and press down to secure
firmly in place.
3. Replace the battery door onto the radio and slide the latch into place.
9980384R89-O
3 Bars
2 Bars
85%–25%
1 Bar
25%–10%
Final 10%
1-7
Flashing
February 10, 2005