Table of Contents
Advertisement
6.1. Rigging the Fixture
CAUTION! Please consider the respective national norms during the installation! The installation must
only be carried out by an authorized employee or dealers!
-
The installation of the fixture has to be built and constructed in a way that it can hold 10 times
the weight for 1 hour without any harming deformation.
-
The installation must always be secured with a secondary safety attachment, e.g. an
appropriate catch net. This secondary safety attachment must be constructed in a way that no
part of the installation can fall down if the main attachment fails.
-
Make sure the area below the installation place is free from unwanted persons during rigging,
de-rigging and servicing.
-
The operator has to make sure that safety-relating and machine-technical installations are
approved by an expert before taking into operation for the first time and after changes before
taking into operation another time.
-
The operator has to make sure that safety-relating and machine-technical installations are
approved by a skilled person once a year.
-
The fixture should be installed in the position where persons cannot reach and where persons
may walk by or be seated.
CAUTION! When installing the device, make sure there is no highly in inflammable material (decoration
articles, etc.) in between a distance of min 0.5 meter.
12 / 22
Advertisement
Table of Contents
