Cable EU
Brown
Light Blue
Yellow/Green
5.4. DMX-512 connection between fixtures
The fixture is equipped with 2-pin XLR sockets for DMX input and output. The sockets are wired in parallel. Only
use a shielded twisted-pair cable designed for 3-pin XLR-plugs and connectors in order to connect the controller
with the fixture or one fixture with another
5.4.1. Occupation of the XLR-connection
CAUTION!
5.4.2. Building a serial DMX-chain
Cable US
Black
White
Green
At the laser fixture, the DMX-cable has to terminate with a terminator. Solder a 120
Ohm resistor between Signal (-) and Signal (+) into a 3-pin XLR-plug and plug and
plug it in the DMX-output of the last fixture.
Pin
Live
Neutral
Earth
10 / 22
International
L
N