Supero SUPERSERVER 8046B-6RF User Manual page 82

S S
UPER ERVER 8046B-6RF/8046B-TRF User's Manual
Select SWDMA2 to allow BIOS to use Single Word DMA mode 2. It has a data
transfer rate of 8.3 MB/s.
Select MWDMA0 to allow BIOS to use Multi-Word DMA mode 0. It has a data
transfer rate of 4.2 MB/s.
Select MWDMA1 to allow BIOS to use Multi-Word DMA mode 1. It has a data
transfer rate of 13.3 MB/s.
Select MWDMA2 to allow BIOS to use Multi-Word DMA mode 2. It has a data
transfer rate of 16.6 MB/s.
Select UDMA0 to allow BIOS to use Ultra DMA mode 0. It has a data transfer
rate of 16.6 MB/s. It has the same transfer rate as PIO mode 4 and Multi-Word
DMA mode 2.
Select UDMA1 to allow BIOS to use Ultra DMA mode 1. It has a data transfer
rate of 25 MB/s.
Select UDMA2 to allow BIOS to use Ultra DMA mode 2. It has a data transfer
rate of 33.3 MB/s.
Select UDMA3 to allow BIOS to use Ultra DMA mode 3. It has a data transfer
rate of 44.4 MB/s.
Select UDMA4 to allow BIOS to use Ultra DMA mode 4. It has a data transfer
rate of 66.6 MB/s.
Select UDMA5 to allow BIOS to use Ultra DMA mode 5. It has a data transfer
rate of 100 MB/s.
Select UDMA6 to allow BIOS to use Ultra DMA mode 6. It has a data transfer
rate of 133 MB/s. The options are Auto, SWDMAn, MWDMAn, and UDMAn.
S.M.A.R.T. For Hard disk drives
Self-Monitoring Analysis and Reporting Technology (SMART) can help predict
impending hard disk drive failures. Select Auto to allow the AMI BIOS to automati-
cally detect hard disk drive support. Select Disabled to prevent the AMI BIOS from
using the S.M.A.R.T. Select Enabled to allow the AMI BIOS to use the S.M.A.R.T.
to support hard drive disk. The options are Disabled, Enabled and Auto.
32Bit Data Transfer
Select Enabled to support 32-bit IDE data transfer. The options are Enabled
and Disabled.
Hard Disk Write Protect
Select Enabled to support Hard Disk Write Protect to prevent data from being written
to a hard drive. The options are Enabled or Disabled.
7-16