Panasonic PV-GS19 Operating Instructions Manual page 52

Installing the Video Stream Driver
For PV-GS34/PV-GS35
• When DirectX9.0 is installed, applications supported
by previous versions of DirectX may not run. In this
case, consult the manufacturers of the disabled
applications.
• DirectX 9.0b must be installed in your PC if it is not
already installed.
1
Turn on the personal computer and start up
Windows.
2
Insert the CD-ROM into the personal
computer's CD-ROM drive.
• Quit all applications.
• The [Setup Menu] Screen appears.
[PV-GS35: Supplied]
3
Click the [Video Stream Driver].
• The set up program starts running.
4
For Windows XP users:
Depending on your system environment,
installation of "DirectX9.0b" may be
required. Click [Yes] and continue with
installation.
• After "DirectX9.0b" is installed, the computer will
restart.
• Do not remove the CD-ROM.
5
Finish installation by following the
on-screen instructions.
• Click [Next] and proceed with installation.
• After completing the installation, click [Finish].
6
After the Video Stream Driver is installed,
please restart your computer.
52
With a PC
[PV-GS34: Supplied]
For PV-GS19/PV-GS31
• For Windows XP users, the USB equipment
operates with the driver installed as standard in OS.
• If you have direct dial-up connection capability to the
Internet, please download the Video Stream Driver.
1
In order to download and install the Video
Stream Driver, go to
http://www.panasonic.ca/english/
customercare/downloads.asp
2
Click [software & drivers].
3
Select [Mini DV Camcorders] in the Product
Category menu.
4
Click [Video Stream Driver version 1.00].
5
Decompress the downloaded data.
6
Double click icon.
• The set up program starts running.
7
Finish installation by following the
on-screen instructions.
• Click [Next] and proceed with installation.
• After completing the installation, click [Finish].
8
After the Video Stream Driver is installed,
please restart your computer.
Connecting the Camcorder to Personal
Computer (For Using as a Web Camera)
1
Set the Camcorder to Tape Recording Mode
or Tape Playback Mode.
• To send the live camera picture to a PC, set
the Camcorder to Tape Recording mode.
• To send pictures recorded on a tape to a PC,
set the Camcorder to Tape Playback mode.