Replacing The Control-Buttons Board; Procedure; Post-Requisites - Dell Inspiron 20 3000 Series Service Manual

Replacing the control-buttons
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
1 Slide the control-buttons board cable into the connector on the control-
buttons board and close the latch to secure the cable.
2 Slide the control-buttons board into the slot on the display bezel till the
securing clips lock in place.
Post-requisites
1 Replace the battery.
2 Replace the back
3 Replace the stand.
computer. After working inside your computer,
After working inside your
cover.

Replacing the control-buttons board

19
board
computer. For more safety
44