Replacing The Control-Buttons Board; Procedure; Post-Requisites - Dell Inspiron 20 3000 Service Manual

Replacing the control-buttons
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Slide the control-buttons board cable into the connector on the control-buttons
board and close the latch to secure the cable.
2 Slide the control-buttons board into the slot on the display bezel till the securing
clips lock in place.

Post-requisites

1 Replace the back
2 Follow the procedure in step 4 in
3 Replace the stand.
42
computer. After working inside your computer, follow
After working inside your
cover.
"Replacing the optical
computer. For more safety best
www.dell.com/
drive".
Before