Stihl MS 210 Instruction Manual page 32

: Disengage the chain brake: Pull
hand guard (9) back towards the
front handle.
: Turn the guide bar so that the
tensioning gear is facing you.
11
10
: Fit the chain over the sprocket (10).
: Fit the guide bar over the collar
screw (11), the head of the rear
collar screw must locate in the slot.
MS 210, MS 210 C, MS 230, MS 230 C, MS 250, MS 250 C
9
: Make sure the drive link tangs
engage the bar groove (see arrow)
and then rotate tensioning gear
counterclockwise as far as stop.
English / USA
: Place the chain sprocket cover in
position and engage guide lugs in
recesses in engine housing at the
same time.
31