Advertisement
Quick start
1 Assemble the nozzle, tubes and hose
as shown
.
2 Pull out the cable to it's full length and
plug in to the mains supply.
3 Switch on by pressing the on/off
variable power switch.
Accessories
1 Fit the hose to the cleaner by inserting
the hose end into the hose inlet.
release button
2 To remove press the release button
down on the hose and pull out.
3 Attach the extension tubes
handle end of the hose. The hose
handle features an airflow control
which can be adjusted as required.
4 Attach the combination floor nozzle to
the extension tubes. The floor nozzle
has two levers for the two positions.
•
Brush up for carpets, rugs etc.
•
Brush down for hard floors, tiles
etc.
5 The other accessories include:
•
Crevice tool
places, behind radiators etc.
•
Brush attachment
delicate objects etc which
attaches to the crevice tool.
To alternate between the brush and
crevice tool push the button down and
slide.
TOPO COMPACT VACUUM CLEANER
to the
for awkward
for pelmets,
4
4
Tools storage
Tools storage
Tools storage
Tools storage
Tools storage
The crevice tool,
brush can be stored
on the tubes for
added convenience.
Product storage
Product storage
Product storage
Product storage
Product storage
When finished, you
can store the
vacuum cleaner as
shown by inserting
the hook on the floor
nozzle into the slot
on the cleaner body.
Controls
Power
Power
Power
Power
Power
To switch the cleaner on press the on/
off variable power switch
switch off press the on/off
switch again.
The suction power can
be adjusted using this
switch. Turn the switch to
the desired level.
Suction may also be varied with the
fingertip control on the handle.
Closed:
full suction
Open:
reduced suction
Automatic cable rewind
Automatic cable rewind
Automatic cable rewind
Automatic cable rewind
Automatic cable rewind
After use, unplug and press the cable
rewind button
to retract the cable.
WARNING: When using the cable
rewind, always hold the plug as the
cable will rewind quickly.
31/5/02, 11:52 AM
inwards. To
Min
Max
Advertisement
